There are a number of places to find used climbing shoes, to include REI, Facebook Marketplace and Goodwill.
It is surprising what some people want for their shoes and climbing gear and it may be cheaper to get new gear when on sale. but sometimes you can get shoes for almost nothing!
First off - Shoes need to fit. It doesn't matter what kind of deal you get if it doesn't fit.
Second - They need to be a good deal. Worn out shoes or overpriced used shoes that can't be returned aren't worth your money or time.
Third - Sanitation. You may find a pair of shoes that are too bad, but used shoes can be pretty nasty with odors, fungus and sometimes blood from previous injuries or hard use. Adequately sanitizing shoes can be difficult and is sometimes expensive. They can also damage shoes.
Sole & Edges
Slightly rounded edges or thin rubber are fine if you plan to resole them
Avoid shoes with holes worn through to the lining or last, deep gouges, or long cuts in the rubber
Rand & Seams
Check that the rubber rand and seams are not pulling apart or delaminating, especially around the toe and heel
Heavy rand damage makes repairs costly or impractical
Closures & Uppers
Make sure Velcro straps, buckles, or laces work properly and uppers aren't torn or stretched out of shape
Wear Patterns
Uneven toe wear or heavy dragging marks can signal worn-down performance or poor footwork from the previous owner
Shape & Last
Different models have distinct widths, downturns, and heel shapes
Try on a pair or test the fit to ensure a snug match with minimal dead space and no painful pressure points
Pre-Stretched Fit
Because used shoes have already broken in, they may be softer and slightly stretched compared to a new pair
Check that the heel still cups securely and pushes your toes forward without slipping
Cost
Consider the cost of new shoes on sale
Sometimes the seller is asking WAY TOO much for a pair of used shoes
You can return new shoes that don't fit, and they come with new rubber
You are stuck with used shoes you purchase
It's OK to bargin
If the seller is asking too much and won't budge - it's OK, there are other shoes that will work for you
Resoling Math
Factor in the cost of a resole if the rubber is thin
Sometimes a cheap pair plus a resole still beats buying new, though worn-out shoes can be false economy if they need immediate repair
Some climbing shoes are simply nasty. They smell terrible, may harbor bacteria or fungi, and can make your entire home stink. If you're considering buying used climbing shoes, don't overlook this. Unless you're willing to put in some effort to clean and sanitize them, it may be best to pass.
IMPORTANT: Many of the cleaning and sanitation methods below can stain, damage, or shorten the life of your shoes. Use caution, especially with expensive climbing shoes. Some methods may weaken the adhesives, damage leather or synthetic materials, or affect the rubber. Consider aggressive treatments only for shoes that were inexpensive enough that you're willing to risk destroying them.
Before attempting to clean or sanitize climbing shoes, keep the following in mind:
Chemicals and solvents: Disinfectants, alcohol, and other chemicals may damage leather, synthetic fabrics, or rubber. They may also weaken the adhesives that hold the sole and other components together.
Hot water: High temperatures can soften or weaken shoe adhesives. Stick to cool or lukewarm water.
Heat during drying: Hair dryers, heaters, radiators, and direct sunlight can damage adhesives and cause shoes to shrink or deform, particularly when wet.
Staining and discoloration: Almost any cleaning or sanitation treatment can discolor shoe materials. Test products on a small, inconspicuous area first.
A thorough hand washing with mild detergent and water is often the best place to start. It can remove a surprising amount of accumulated sweat, dirt, and odor-causing residue.
Use mild detergent and cool or lukewarm water (NOT HOT)
Hand wash only. Avoid putting climbing shoes in a washing machine
Pay particular attention to the inside of the shoes, where sweat and bacteria accumulate
You may need to wash them twice to remove stubborn odors.
Rinse thoroughly until the water runs clear, then rinse again to remove detergent residue
Allow the shoes to dry naturally without applying heat
Let them drip-dry in a sink
Stuff them loosely with clean, dry towels to absorb excess moisture
Remove the towels and allow the shoes to air-dry completely, ideally in a comfortable room-temperature environment
Washing removes dirt, sweat, and much of the material responsible for unpleasant odors. Disinfection is a separate step intended to reduce microorganisms, including odor-causing bacteria and potentially fungi. Not all disinfectants work against fungal spores, and not all are safe for climbing shoe materials.
Here are some options climbers consider:
Commercial Shoe Disinfectants
Products specifically formulated for footwear may help reduce bacteria and fungi
Some are marketed for controlling the fungi associated with athlete's foot and toenail infections
Check the product label for its effectiveness against fungi and its compatibility with leather, synthetic materials, and rubber
Specialized products can be relatively expensive
UV Shoe Sanitizers
UV-C devices are marketed to reduce microorganisms inside shoes
Effectiveness depends on the device, exposure time, and whether the light reaches the surfaces being treated
UV light cannot reliably disinfect areas it cannot reach
Some devices can be quite expensive
Lysol
Some climbers use household disinfectant sprays to deodorize and sanitize their climbing shoes
Depending on the formulation, ingredients may include benzalkonium chloride, ethanol, citric acid, or hydrogen peroxide
Lightly misting the inside of shoes is less aggressive than soaking them, but compatibility depends on the specific product
Avoid soaking climbing shoes in Lysol
Prolonged exposure to chemicals and moisture may damage leather, synthetic materials, or adhesives
Bleach
Diluted bleach is sometimes suggested as a disinfectant
It can be effective against many microorganisms when used at the correct concentration and contact time
However, bleach is particularly harsh on climbing shoe materials and will likely damage leather, fabrics, rubber, and adhesives
It can also cause significant discoloration
Generally, this is an option you should avoid for climbing shoes
Betadine (Povidone-Iodine)
Betadine is an iodine-based antiseptic
Some climbers use it to treat particularly unpleasant shoes
It can stain shoe materials, although the degree of staining varies
Avoid assuming that soaking shoes overnight is safe
Prolonged exposure to moisture and antiseptic solutions may damage the shoe
Betadine Surgical Scrub is different from regular Betadine
It contains additional detergents and surfactants that may be more problematic for shoe materials and adhesives
Vinegar
Mix equal parts white vinegar and water in a spray bottle
Lightly mist the inside of the shoes and allow them to air-dry completely
Vinegar may help reduce some odor-causing bacteria and fungal growth, but it is not a reliable disinfectant and should not be considered a treatment for fungal infections
Avoid soaking shoes in vinegar, as prolonged exposure may affect certain materials and adhesives
Rubbing Alcohol
Some climbers use rubbing alcohol to disinfect the inside of their shoes
Alcohol can kill many bacteria and some fungi, but its effectiveness depends on concentration and contact time
It is not reliably effective against fungal spores
Alcohol can strip natural oils from leather, potentially causing it to dry out or become brittle
Repeated or prolonged exposure may also affect some shoe materials and adhesives
Avoid soaking shoes in alcohol
Recommendation: Start with a thorough hand washing using mild detergent and lukewarm water. Allow the shoes to dry completely, then consider a footwear-specific disinfectant if additional treatment is needed. Avoid aggressive chemical treatments and prolonged soaking unless you're willing to risk damaging the shoes.