Gather Games and Activities
Gather Games and Activities
Sourced from: troopresources.scouting.org pre-opening-gathering-period-activities
Hit the Bucket
Materials: sturdy 5 gallon bucket, 1 Scout stave, 1 large rubber playground ball
Method: Scouts form a large circle with one Scout standing on the bucket in middle of the circle with stave in hand. The ball is passed around and thrown at the bucket, while the Scout guards the bucket with the Scout stave. If the bucket is hit, the thrower replaces the Scout with the stave.
Hitching Challenge (Race)
Materials: 15-foot braided nylon or polyester cords attached at the bottom of one or more erected 4-foot upright poles (Scout staves can be used, with someone holding the pole in a vertical position for the Scout applying the hitches)
Method: Scouts apply a succession of over-an-end half hitches over the upright pole(s).
Scoring: The most half hitches applied in a set amount of seconds is the winner.
Hula Hoop Horseshoes
Materials: large open space, hula hoops, socks filled with coarse sand
Method: Use hula hoops as targets and sand-filled socks as horseshoes, and play regulation “Horseshoes” rules. A sock inside the hoop is a ringer. As an informal, gathering period activity, take turns. (This activity may also be adapted and played as a patrol game.)
Hunker Down
Materials: 20-foot length of 1/2-inch soft, synthetic rope, two platforms 6 to 8-inches tall (two halves of a cinder block or two cuts from a downed tree, 8-inches in diameter)
Method: Two Scouts stand facing each other 12 to 15 feet away on the platforms. On signal, each tries to unbalance the other by either pulling or letting up the tension on the rope. Both must hold onto the rope at all times while trying to unbalance the other. The Scout left standing the longest on their platform while still holding onto their rope wins. If a Scout lets go of the rope, they’re out, even if they’re still standing on their platform. Scouts can take turns challenging the winner.
Moon Ball
Materials: inflated beach ball for the whole troop or one beach ball for each patrol
Method: As a team building activity, the object is for a patrol to keep the beach ball aloft as long as possible. Scouts are not allowed to hit the ball twice in a row. This activity becomes exciting as the Scouts count out loud the number of hits and attempt to surpass their personal best.
Prisoners Escape
Use this activity for new Scouts and save for following year.
Materials: 3-foot length of cord with a small fixed loop on each end for each Scout
Method: Each length of cord forms a pair of “handcuffs” by slipping a bight through the loop. Scouts form buddies, and one slips a hand through the sliding loop on each end of the cord, and the other slips one hand through one sliding loop, passes the free end behind their buddy’s cord and then slips their other hand through the other sliding loop of their own cord. In this way, both Scouts are “handcuffed” together. They must escape, but cannot untie the knots or slip either hand out of a loop.
Solution: The trick to escaping is for one Scout to bend the middle of their cord and pass the bend behind one of their buddy’s sliding loops and over their buddy’s hand.
Find Your Pace
Materials: a designated area measuring 100 feet marked at each end with a tent stake
Method: As Scouts arrive, invite them to walk at their normal stride from one end of the course to the other, starting with their left foot and counting how many times their right food hits the ground. They should do this a few times to get as accurate a count as possible. When the number of paces has been determined, they should divide that number into 100 in order to know the length in feet of one of their paces.
Scoring: (none)
Four Square
Materials: playground ball, 16-foot x 16-foot playing area on wood, tile, or concrete.
Method: This game can be played by four Scouts, four patrols, or four teams. Four 8-foot squares are marked out inside the playing area. The squares can be numbered 1 to 4. Each of four patrol or troop teams are assigned a square. One Scout from each team starts inside their square with the rest of the team lined up single file at their corner. The Scout in square 1 serves the ball in volleyball fashion so that it bounces in square 3. They then run to the rear of their patrol’s line. The Scout in square 3 hits the ball on the first bounce to either square 2 or square 4. The game continues with each Scout hitting the ball so that it bounces into either of the two opposite squares. They cannot return it to the square it came from. After each hit, the Scout goes to the end of their patrol line, and the next in line becomes the Scout for their team. When a shot is missed, the last Scout who successfully played the ball resumes the game by serving the ball to the Scout diagonally across from them.
Scoring: Score one point against a team that fails to return a shot properly. The team with the fewest points wins.
Flint and Steel
Materials: high carbon, fire steel strikers, sharp-edged flint, chert, or quartz rocks, pieces of well-charred cloth, tinder bundle material, a fire pan or other receptacle for receiving flaming tinder bundles, qualified supervision
Method: Using the materials, those Scouts with previous instruction endeavor to throw a spark onto a piece of charred cloth and then use it to ignite a tinder bundle. Flint and Steel How-to Video
Guess That Height
Materials: a stick for every two Scouts, a tree, flagpole, or some other object the height of which is to be determined
Method: As Scouts arrive, invite them to determine the height of the object in question, using either the stick or felling method. (Refer to page 330 in the Scout Handbook.)
Scoring: The Scout that guesses the closest wins a prize.
Guess That Width
Materials: for each Scout, a compass or a four stakes to be used as markers, a distance the width of which is to be measured, e.g. a marked out area on a field with an orange cone serving as a landmark, a large ditch, a stream, etc.
Method: As Scouts arrive, invite them to determine the width of the area in question, either with or without a compass. (Refer to pages 330 or 331 in the Scout Handbook.)
Scoring: The Scout that guesses the closest wins a prize.
Name That Plant
Materials: a collection of locally grown leaves from various plants and trees each assigned a number displayed on a table, paper and pencils
Method: On a piece of paper, Scouts write their name and the name of the plant corresponding to each numbered leaf displayed on the table. After identifying the leaves the best they can, they record their answers on their paper and turn it in.
Scoring: Some kind of prize is presented for the most correct identifications.
Name the Merit Badge
Materials: a picture of each merit badge, each picture numbered but not identified by title (see the “Merits of Scouting” poster), one sheet of paper and a pencil for each Scout
Method: The numbered merit badge pictures are spread out on one or more tables. As each Scout arrives at the meeting, they are given a sheet of paper and a pencil and asked to number their paper from one to whatever the highest-numbered merit badge is. Just before the opening ceremony, all papers are collected, and the correct answers tallied. Later the winner(s) are announced and can presented with a small prize.
Puzzling
Materials: large, unassembled jigsaw puzzle with pieces set out in a jumbled pile on a table.
Method: Scouts work as a team to put the puzzle together. In the event the puzzle cannot be completed before it’s time for the opening ceremony, their progress should be carefully stored for continuation at a later date.
Ring Ball
Materials: playground ball
Method: Scouts form a circle with one Scout who is “It” in the middle. Play is begun by passing the ball to a Scout other than “It”. The ball is passed around or across the circle from Scout to Scout, while the Scout who is “It” tries to intercept the ball and force it to touch the floor. If “It” can make the ball touch the floor, the Scout who last touched the ball before “It” did goes to the center and the game continues. It’s not enough to just touch the ball as it’s being passed around. “It” must actually make the ball hit the ground.
Rope Toss
Materials: 40-50-foot lengths of 1/4-inch to 3/8-inch rope, sticks or other item to mark distances
Method: As Scouts arrive, they take turns coiling and throwing the rope. A marker is placed on the ground to keep track of the longest tosses.
Scoring: Some kind of prize is presented for the longest toss.
Signaling
Materials: for each patrol: small flag to be used as a signal flag, two morse code references, paper and pencil
Method: Two Scouts from each patrol, serving as the senders, are stationed a fair distance away from the rest of the patrol, so they and the patrol are out of ear shot. The senders are given a short message to send that can be already written in morse code, or can be written in letters of the alphabet along with a morse code reference. The patrol has a blank paper, a pencil, and there own morse code reference for recording the message that will be sent.
When all are in position and ready, one sender uses the flag to send each letter of the message in morse code by wig-wagging. The flag held up straight and tall = the start of a letter. A swipe to the right = a dot. A swipe to the left = a dash. The flag swished downward = the end of the word. The other sender dictates to the Scout with the flag. They obviously need to communicate and cooperate with one another.
The patrol needs record on their paper the dots and dashes being sent. Afterwards, they can refer to their reference sheet to decipher the message.
Scoring: The first patrol to correctly decipher the message, wins.
Variation: Send the message in the dark using flashlights.
Square Lashing Challenge (Race)
Materials: horizontal hitching pole (4-foot uprights and Scout stave or longer pole with approximately the same diameter as a Scout stave) three additional Scout staves, three 6-1/2-foot lashing ropes
Method: Facing the horizontal (crossing) pole, and placing a Scout stave behind it, Scouts take turns seeing how fast they can join the poles together with a square lashing. Scouts can go one at a time trying for their fastest time, or up to three Scouts (or more, depending upon the length of the horizontal pole) can go at once, and the challenge can become a race.
Scoring: The fastest time in tying a tight, correctly formed square lashing (wins).
Three-leg Compass Walk
Materials: for each Scout, a compass, an individually wrapped piece of candy
Method: In a large outdoor area, the piece of candy is placed on the ground. Standing where the candy lies, the Scout sets their compass at 360º, faces north, and walks for 50 paces following that bearing. Next, they set their compass for 120º, face that bearing and take another 50 paces. Finally, they set their compass for 240º, face that bearing, and again taks 50 paces. When they’re done, if they’re five feet from the piece of candy, they can pick it up, put it in their pocket, or eat it.
Note: Ideally, the candy will be placed on grass or other terrain so the Scout can’t spot it until they’re finished the last leg of the triangle.
Variation: The Scout chooses their own bearings, adding 120º to the first and second as they go.