Worn out Tranantulace - Not worth resoling
Upgrade or buy replacement/upgrade when on Sale
Some resolers even refuse to resole these
Resoling climbing shoes is the process of replacing the worn-out rubber on the bottom of your shoes while keeping the original shoe upper. It is one of the best ways to extend the life of climbing shoes, save money, and maintain a familiar fit.
The key is to resole your shoes before you wear through the rubber and damage the rand (the rubber wrapping around the toe and sides of the shoe).
Based in Yakima, Washington
Vertical World Receiving Schedule from Seattle and North Gyms: Apx Every Week
3509 Evanston Ave N, Seattle, WA 98103
Phone: (206) 632-8686
Offers climbing shoe resoles, rand repairs, and toe patches.
Works with sticky climbing shoe rubber.
Formerly Dave Page, Cobbler. The business has continued at the same address under new ownership.
Details: Long-running specialist in mountain boot and climbing shoe repair with decades of experience. Opinions on the forum Cascade Climbers are mixed—some climbers praise the quick turnaround and low cost, while others note inconsistent quality with glues or edges.
Half sole: $45/pair
Full sole: $55/pair
Approximately 4.5 weeks turnaround, excluding shipping
Works on any brand of climbing shoe
Offers rand repairs and different rubber options
Bishop, CA
Well-known climbing shoe resoler
A favorite among climbers on Reddit for precise TC Pro and technical shoe resoles.
Multiple rubber compound options
Established climbing shoe repair specialist
Mail-in service and in-person drop-off in Boulder
Offers sole and rand repairs
Frequently recommended by local climbers on Mountain Project for reliable, high-performance turnarounds.
There are several reasons to resole climbing shoes:
Save Money: A resole typically costs less than purchasing a new pair of climbing shoes.
Extend Shoe Lifespan: You can replace the sole multiple times if the upper and rand remain in good condition.
Maintain Familiar Fit: You keep the same broken-in shoe shape rather than adjusting to a new pair.
Maintain Performance: Fresh rubber restores friction, edging, and confidence on small footholds.
Reduce Waste: Resoling keeps otherwise functional shoes out of the landfill.
$250 TC Pro
Time for a resole...agian?
The best time to resole is when the outsole is getting thin but before the rubber wears through to the rand.
No resole needed yet
Rubber is gradually thinning
No holes or exposed rand
Shoe still performs normally
Continue climbing and inspect periodically.
Resole now
Toe rubber is noticeably thin
Rubber is approaching the rand
You can see the transition between the outsole and rand becoming exposed
This is the best time to send your shoes for resoling.
Resole may require rand repair
Hole has developed in the toe
Rand rubber is exposed or damaged
Additional repair work may be necessary
A resole may still be possible, but it will cost more.
Consider replacing
Large sections of rand are missing
Upper material is torn or separating
Shoe structure or shape is compromised
Repair may be uneconomical or impossible.
There is no fixed schedule. It depends on climbing frequency, footwork, climbing style, shoe construction, and how aggressively you use your toes.
Typical estimates:
Climbing frequency: Once per week
6–12+ months
Climbing frequency: 2–3 times per week
3–8 months
Climbing frequency: 4–5 times per week
2–5 months
Climbing frequency: Daily climbing
1–3 months
These are rough estimates, not guarantees. Beginners can wear through shoes surprisingly quickly because of poor footwork, dragging their toes, and scraping shoes against the wall.
When sending shoes to a specialized cobbler, you can request specific performance modifications:
Midsole Addition: Adding a midsole during a resole stiffens the shoe for better edging
Sole Concavity (Cups): Adds extra shape to the sole for steep overhangs
Scum Patches: Extra rubber patches applied for enhanced toe-hook friction or knuckle protection
Crack Rands: Extending the rubber rands higher up the outside edge to protect against crack climbing and foot jamming
Heel Hook Treatment: Buffing or stripping oxidized surface rubber on the heel cup to restore sticky friction
When resoling, you can often choose a different rubber compound from the original manufacturer.
Excellent edging support
Relatively stiff and durable
Good for standing on small footholds
Popular for trad, sport, and all-around climbing
Softer and stickier feel
Excellent friction on smears and volumes
Good for bouldering and steep sport climbing
Generally wears faster than XS Edge
Excellent friction and sensitivity
Particularly good for smearing
Popular for bouldering and technical face climbing
The best choice is usually to stay with the original rubber or select a compound that complements your climbing style. Rubber compatibility depends on the shoe and resoler.
Most climbing shoes can be resoled 1–3 times, sometimes more, depending on their construction and how well you maintain them.
A few considerations:
The upper needs to remain in good condition
The rand must have enough material remaining
Repeated resoles can change the shoe's shape and fit
Aggressive shoes may be more difficult to maintain in their original shape
Some shoes are easier and more economical to resole than others
Use proper footwork: Avoid dragging your toes against the wall
Avoid walking around in climbing shoes: Use regular shoes between climbs
Don't use them as approach shoes: Rough ground wears down the rubber
Keep them clean: Brush off dirt and chalk from the rubber
Avoid excessive heat: Don't leave shoes in a hot car or direct sunlight
Inspect the toe regularly: Catching wear early is the biggest factor in avoiding expensive rand repairs